![]() ![]() ![]() Small information for Ubuntu Linux users. There is now a firmware for the BMG extruder for both Weedo X40 hardware versions.įor more information see X40 PRO Firmware The X40 PRO firmware version 1.2.5.5 has been released. Weedo X40 PRO Cura 4.13 configuration with over 3500 printing profiles see X40-Community cloud.Weedo X40 Cura 4.13 configuration with over 3000 printing profiles (Cura_4.13_Weedo_X40_Resources-11.zip).In the next Octopi for Weedo X40 distribution it will also be possible to use the dual mode Duplicate and Mirrored with OctoPrint.ĭownload the free Weedo X40 configuration for the Weedo X40: Please calibrate your printer and save the settings in the EEPROM. Since switching between slicers is no longer necessary, the calibration parameters have been removed from the start script. With Ultimaker Cura 4.13.1 and Weedo firmware version 1.2.5 or X40 PRO firmware version 1.2.5.5, the printer can now be used as Single LH, Single RH, Dual Mode Normal, Dual Mode Duplicate and Dual Mode Mirrored. The change was also introduced in the Weedo X40 PRO configuration. The Weedo X40 Cura 4.13 configuration Revision 11 has been released. You can read how to do this at: How to calibrate the Weedo X40 printer Weedo X40 PRO Cura 5.0 extra print profiles (Release 1.0.0, only for X40-Community member)įor perfect printing results, the printer must be calibrated.Weedo X40 PRO Cura 5.0 configuration (Release 1.0.0, only for X40-Community member).Added the print profiles for ColorFabb PLA/PHA (Extra print profile).Added the print profiles for ColorFabb ALLPHA (Extra print profile).For some material, the K-factor was added for the Linear Advance feature (Requires the Linear Advance Cura plugin).The shrinkage compensation was determined and added for all materials with shrinkage (second step for dimensionally stable parts).The material flow has been adjusted so that the set line width is correct (first step for dimensionally accurate parts).The gap dimensions for the breakaway support structure have been revised and ultimately depend on the layer height.0.2mm, 0.4mm, 0.6mm and 0.8mm nozzles are supported.If you are using MacOS or Linux, then the Cura 5.X Thumbnail Plugin Version 2 must be installed and activeted! Dual mode normal, mirror mode and copy mode are supported.The print profiles for the Igus filament and newly added filaments from ColorFabb have been moved to an Extra Print Profiles zip file and can easily be added to the X40 PRO configuration if required. The Weedo X40 PRO configuration is a further development of the WEEDO X40 configuration for Cura and requires the latest X40 PRO Firmware, as features are used that only support the PRO variant. ![]() First release of the Weedo X40 PRO configuration for Cura 5.XĪfter months of testing and development, the first X40 PRO configuration for Cura 5.0 has been released. For more information about the changes, see the X40 PRO changelog. The X40 PRO version 1.2.5.6 has been released. With the filament, overhangs can be printed particularly well. In addition to detailed improvements, there are now also print profiles for the colorFabb nGen filament. The configuration should also work with Cura 5.0.0 (but was not tested with it). As usual, all X40 community members can download the configuration from the cloud. In line with the release of Ultimaker Cura 5.1, I have updated and released the X40 PRO configuration. Add new Fiberlogy PLA Mineral color black, concrete and marble.Navigate to the Printing settings menu → Build Plate Adhesion → Build Plate Adhesion Type needs to be set to “None” when you print the maximum size model.Cura 5.1 and 5.0 Weedo X40 PRO configurartion 1.1.1 released.You can customize some parameters after importing the profile, but we still recommend that use the parameters in the profile that we provide.Here we have successfully imported the file to Cura slicer, and we hope you enjoy printing! Select the profile that you just imported, and then click the “Activate” button. The provided profiles were tested on Cura 4.12.0, may not work with other versions.Choose different parameter profiles according to different filament types.If import multiple files, repeat the same operation in step 2. Then click Import button to import the desired print profile. In the same interface opened in Step 1, click “Profiles” on the left side. Click Settings → Configure setting visibility., and then tick Check all box to make all settings visible. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |